MyBioSource High-sensitivity SARS-CoV-2 S1 IgG ELISA Kit

Supply your measurement data: Help

You can supply your raw data in two ways:

Enter (or Paste) the raw data into the edit box. Use the same format as the example data (i.e. numbers separated by spaces). More...
Select a data file on your computer and press Upload. Most raw data file formats are automatically recognised and processed. Formats not currently supported can be added very quickly. More...

After reviewing other analysis parameters press the Calculate button below to process your results.

Raw File

Paste

Flag Positions

Default

Unknown

Blank

Standard

Review or edit the concentration values here: Help

Enter or Paste the values into the edit box. If the values are in a sequence, select the Series... button to define the series.

Calibrator

Conc. (ng/mL)

Standard1
Standard2
Standard3
Standard4
Standard5

The series is calculated from the value specified in the first row and the sequence settings:

Press , , , or to change the operation.
Enter a delta value for each step.

To remove the series and enter your own values push the Series button.

Series...

Paste

Review or edit the dilution factors here: Help

Enter or Paste the values into the edit box. If the values are in a sequence, select the Series... button to define the series.

Sample

Factor

The series is calculated from the value specified in the first row and the sequence settings:

Press , , , or to change the operation.
Enter a delta value for each step.
If the series repeats in blocks, press the restart button and enter the number of rows in each repeated block.

To remove the series and enter your own values push the Series button.

Series...

Paste

Optionally provide an ID for each of your Unknown samples. Help

Provide identifiers for each of your samples. If your IDs use a numeric sequence press Series to define an increment.

Sample

ID

The Sample ID series is generated from the specified first ID and increment value.

Series...

Paste

Optionally provide additional data to store alongside the results for this assay:

Run Name:

Optionally provide a custom run name; this is useful to help you to identify these results in the future. The provided name will appear at the top of the generated report and on your home page (under your analyses list).

Notes:

Optionally provide notes to store alongside this assay analysis (e.g. Lot ID, preparation notes, etc.). The provided notes will be included at the top of the generated report.

MyBioSource High-sensitivity SARS-CoV-2 S1 IgG ELISA Kit

Measurements

Microplate

Standard Concentrations

Dilution Factors

Sample IDs

Run Notes