Enzyme immunoassay (EIA) for the quantification of
This method plots %B/B0 for the standards versus
8-Isoprostane concentration using linear (y) and log (x) axes and performs a 4-parameter logistic fit.
Sample positions with %B/B0 values greater than 80% or less than 20% are highlighted in yellow. These samples should be re-assayed as they generally fall out of the linear range of the standard curve.
If the entire plate was read then supply the measured value for each well. Alternatively, if only specific parts of the plate were read then list only those measured values. In this case an additional step is required: under the Microplate section below, select or create a layout which defines which wells were read and which were not. More...
A zero concentration value has been specified with a logarithmic x axis.
This is valid but means that you will not see the zero standard on the chart. One alternative is to use a suitably low value, such as 0.01 instead of zero. If you make this change it will affect the fit very slightly but is unlikely to affect your results significantly.
Cayman Chemical Company., Inc. All rights reserved.
You need to be a member for this function.
Please log in
or join now.